我现在是压二次元动画类型的偏向mode 2，电影和3D游戏录像的就用mode 106_taro 写了：我自己大部分情况下还在用aqmode1……
除了對 ref 的限制有問題之外，還會莫名將 b_pyramid 設成 0…？bakabakashi 写了：10bit版如果加--level的话,对ref的限制似乎有问题.
1920x1080下l5.1正常,l5.0变成10(13),l4.0变成2(4),l4.1/l4.2变成3(4).
剩下的没有再试了
加上 --level 4.1 之後Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High 10@L5.0
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 1s 0ms
Bit rate : 877 Kbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 10 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.018
Stream size : 107 KiB (99%)
Writing library : x264 core 116 r2044+596_tMod-10bit 693389e
Encoding settings : cabac=1 / ref=4 / deblock=1:0:0 / analyse=0x3:0x133 / me=umh / subme=10 / psy=1 / fade_compensate=0.00 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=24 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=9 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / fgo=0 / bframes=8 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc_lookahead=60 / rc=crf / mbtree=1 / crf=20.0000 / qcomp=0.60 / qpmin=0 / qpmax=81 / qpstep=4 / ip_ratio=1.40 / aq=1:1.00
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High 10@L4.1
Format settings, CABAC : Yes
Format settings, ReFrames : 3 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 1s 0ms
Bit rate : 896 Kbps
Maximum bit rate : 896 Kbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 10 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.018
Stream size : 109 KiB (99%)
Writing library : x264 core 116 r2044+596_tMod-10bit 693389e
Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x133 / me=umh / subme=10 / psy=1 / fade_compensate=0.00 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=24 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=9 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / fgo=0 / bframes=8 / b_pyramid=0 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc_lookahead=60 / rc=crf / mbtree=1 / crf=20.0000 / qcomp=0.60 / qpmin=0 / qpmax=81 / qpstep=4 / vbv_maxrate=150000 / vbv_bufsize=187500 / crf_max=0.0 / nal_hrd=none / ip_ratio=1.40 / aq=1:1.00
代码： 全选
if( max_dec_frame_buffering == 4 && param->i_bframe_pyramid )
param->i_bframe_pyramid = 0;
else if( max_dec_frame_buffering == 2 && param->i_bframe )
param->i_bframe = 0;
else if( max_dec_frame_buffering == 1 )
{
x264_log( NULL, X264_LOG_ERROR, "Impossible DPB size %d required by level %s. Lowest\n", l->dpb, level_name );
x264_log( NULL, X264_LOG_ERROR, "possible is %d; try a higher level or lower resolution.\n", dpb );
return -1;
}
else if( param->i_dpb_size > param->i_frame_reference )
param->i_dpb_size--;
else
param->i_frame_reference--;