分页: 1 / 1

求助, x265 Yuuki 3.0 Invalid frame dimensions 0x0 问题.

发表于 : 2019-06-25 20:16
Niconeiko
今天在压某DVD源的时候.遇到这样一个问题..

代码: 全选

D:\[DVD][181116] Koi to Uso OAD\KOITOUSO_8_OAD\VIDEO_TS>vspipe --y4m "1.vpy" - | x265-Yuuki-3.0+2-ge71f790de+23-10bit-lite --y4m -D 10 --preset slower --tune vcb-s++ --ctu 32 --crf 15 --qg-size 3 --pbratio 1.2 --no-sao --me 3 --subme 4 --merange 44 --limit-tu 4 --b-intra --no-rect --no-amp --ref 4 --weightb --keyint 360 --min-keyint 1 --bframes 7 --aq-mode 1 --aq-strength 0.9 --rd 4 --psy-rd 2.0 --psy-rdoq 1.2 --rdoq-level 2 --no-open-gop --rc-lookahead 75 --scenecut 40 --qcomp 0.65 --no-strong-intra-smoothing --rskip --output "1.hevc" –
x265 [error]: unable to open input file <–>
[mpeg2video @ 000001ad481d3440] Invalid frame dimensions 0x0.
[mpeg2video @ 000001ad481d3440] Invalid frame dimensions 0x0.
[mpeg2video @ 000001ad481d3440] Invalid frame dimensions 0x0.
[mpeg2video @ 000001ad481d3440] Invalid frame dimensions 0x0.
[mpeg2video @ 000001ad481d3440] Invalid frame dimensions 0x0.
[mpeg2video @ 000001ad481d3440] Invalid frame dimensions 0x0.
[mpeg2video @ 000001ad481d3440] Invalid frame dimensions 0x0.
[mpeg2video @ 000001ad481d3440] Invalid frame dimensions 0x0.
Error: fwrite() call failed when writing frame: 0, plane: 0, line: 1, errno: 22
Output 4 frames in 4.14 seconds (0.97 fps)
VS的脚本Test过.没有问题

代码: 全选

2019-06-25 20:07:59.672
Script was successfully evaluated. Output video info:
Frames: 15355 | Time: 0:08:32.345 | Size: 1280x720 | FPS: 30000/1001 = 29.97 | Format: YUV420P10
之后尝试将vob文件混流成mkv再压制.在混流中提示了这个错误.
--- 任务“混流到目录“D:\[DVD][181116] Koi to Uso OAD\KOITOUSO_8_OAD\VIDEO_TS”中的文件“VTS_01_2.mkv””(启动时间 2019-06-25 19:23:04) 的警告消息 ---
在非闭合画面组中发现至少一个缺少第二参考帧的 B 帧。
刚刚也问了几位大佬了,也都无能为力,希望大佬们支支招,谢谢!!

Re: 求助, x265 Yuuki 3.0 Invalid frame dimensions 0x0 问题.

发表于 : 2019-06-25 20:42
Niconeiko
问题已经解决了,谢谢各位,